5 Series E60 M5 (S85) SAL
34 33 071
Replacing vacuum hose for brake booster
(S85)
Necessary preliminary tasks:
•
Read and comply with General Information
•
Remove lower section of microfilter housing.
Important!
Before starting work, press the brake pedal to the floor several
times to reduce the vacuum pressure in the brake booster.
This makes it easier to remove the PA pipe.
Disconnect plug connection (1).
Unscrew nuts (2).
Unlock quick-release fastener (3) and detach vacuum hose.
Release clamp (1) and detach vacuum line.
Installation:
Replace clamp (1).
Detach non-return valve (2) from brake booster and remove
vacuum line (3).
Installation:
Check sealing ring in brake booster and replace if necessary.
RA Replacing vacuum hose for brake booster (S85)
BMW AG - TIS
22.02.2013 21:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
