5 Series E60 M5 (S85) SAL
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer metal sheet only.
Sunroof water drain hose is located behind severance cut a.
Measurement a = approx. 105 mm from roof edge.
Measurement b = approx. 150 mm behind bore dia. 6 mm.
Open weld joints in areas (1) and (4).
Note:
Side frame is bonded and welded to longitudinal member in area (3).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffle (2).
-
Weld in reinforcement plates at severance cuts.
-
Bond and rivet new part in area (4).
Use Hemlock 813 blind rivet (sourcing reference: BMW Parts Service picture board - Aluminium and
steel/bonding and welding).
Double number of rivets with respect to welding spots in area (4).
RA Replacing rear left side panel (partial replacement, longitudinal member cover b
BMW AG - TIS
22.02.2013 22:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
