5 Series E60 M5 (S85) SAL
Spot-drill rivets in area (1) from protruding rear side or grind and
punch through.
Open rivet joints in areas (1) to (3).
Installation:
Use 5 rivets (size 13) in area (1).
Use 4 rivets (size 13) in area (2).
Use 3 rivets (size 13) in area (3).
Use 4 rivets (size 13) in area (4).
Use 7 rivets (size 13) in area (5).
Open rivet joints in areas (1) to (3).
As a rule, part of the punch rivet remains in the rear engine carrier
in area (2). Do not drill out remnants. Set blind rivets next to
punch rivets.
Open weld joint in area (1).
Installation:
Use 4 rivets (size 13) in area (1).
Use 5 rivets (size 13) in area (2)
Use 6 rivets (size 13) in area (3).
Install 2 EMC screws in area (1).
Open rivet joints in area (1) to (3).
Open weld joint in area (4).
Installation:
Use 3 rivets (size 13) in area (1).
Use 6 rivets (size 13) in area (2).
Use 1 rivet (size 13) in area (3).
Install 2 EMC screws in area (2).
RA Replacing front section of engine support to left wheel arch
BMW AG - TIS
22.02.2013 22:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
