5 Series E60 M5 (S85) SAL
Unhook tension spring (1) from rear lid hinge (2).
Installation:
Following parts on the tension spring must not be damaged or
missing:
1
Plastic sleeve
2
Foam inlay in tension spring
Important!
Semicircular rubber buffer (2) (from window repair kit) must
be fitted to rear lid hinge (3) without end stop (1).
Stick semicircular rubber buffer (2) at spacing (A) on rear lid
hinge (3).
A= 65 mm
Semicircular rubber buffer (2) must touch rear lid hinge (3) in
area (4) with rear lid open.
RA Removing and installing/replacing left tension spring for rear lid
BMW AG - TIS
22.02.2013 23:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
