bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

14 RA Removing And Installing_replacing Inside Door Opener For Left Or Right Front Doo|Page 1655 > < 13 RA Removing And Installing_replacing Outside Handle And Lock Actuation Of Left Or R
Page 1
background image

51 21 225

Removing and installing/replacing inside door
opener for left or right front door (up to
03/2007)

Necessary preliminary tasks:

Remove front door trim panel

Unhook Bowden cable for release lever:

Tighten release lever (1).

Lever out lock (2).

Detach Bowden cable (3) towards rear/top.

Installation:

For fitting, press release lever (1) fully onto door trim panel.

Release nuts (1 and 2).

Remove retaining plate from door trim panel (4).

Installation:

Retaining plate must be positioned over pin (3).

RA  Removing and installing/replacing inside door opener for left or right front doo

BMW AG - TIS

23.02.2013  00:45

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

14 RA Removing And Installing_replacing Inside Door Opener For Left Or Right Front Doo|Page 1655 > < 13 RA Removing And Installing_replacing Outside Handle And Lock Actuation Of Left Or R