5 Series E60 M5 (S85) SAL
51 22 180
Removing and installing/replacing cover on
outside handle
Note:
If replacing version with Comfort Access/CA:
In order to avoid Comfort Access malfunction, use only original
BMW paints on the cover with electrically non-conducting primer.
New part* (from 09/2005) is provided with electrically non-
conducting primer.
* Sourcing reference: BMW Parts Service
Necessary preliminary tasks:
•
Remove outside handle
Remove trim (2).
Note:
Protect bore (1) against scratching (risk of corrosion).
Release screw (2).
Installation:
Press cover (3) slightly towards rear when screwing down (gap).
Tightening torque 51 22 8AZ
.
RA Removing and installing/replacing cover on outside handle
BMW AG - TIS
23.02.2013 00:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
