bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Windscreen|Page 1734 > < 3 RA Removing And Installing _ Replacing Windscreen
Page 1
background image

51 31 000

Removing and installing/replacing
windscreen

Special tools required:

00 9 322

51 0 010

51 3 010

Important!

The "Instructions on cementing windscreen" serve as the
basis for this repair instruction and must be observed without
fail.

Vehicles with head-up display (HUD):

Check whether the HUD marking at bottom right appears on
the windscreen (malfunction).

Left-hand drive cars up to build date 02/2006:

Check whether cover for light module is installed.

If not installed, cover must be retrofitted.

Note:

Removal is performed with Roll Out 2000

. Only use an

oscillating blade when replacing the windscreen.

Necessary preliminary tasks:

Remove rubber frame for windscreen

Remove interior rear-view mirror

Remove rain/light sensor

If necessary, remove fogging/condensation sensor

If necessary, remove camera for Lane Departure Warning

Remove cover for cowl panel

Cover front side panels with protective covers

Replacement:

If necessary, replace optical element for solar rain/light

sensor

RA  Removing and installing/replacing windscreen

BMW AG - TIS

23.02.2013  01:14

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Windscreen|Page 1734 > < 3 RA Removing And Installing _ Replacing Windscreen