bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing Rear Left Or Right Door Trim Panel (long Version Or From|Page 1808 > < 2 RA Removing And Installing_replacing Door Pocket On Rear Left Or Right Door Trim Pa
Page 1
background image

51 42 000

Removing and installing rear left or right door
trim panel (long version or from 03/2007)

Special tools required:

00 9 317

Warning!

Model with side airbag:

Side airbag is mounted on door trim panel:

Disconnect battery.

Important!

Do not use any sharp-edged removal tools, risk of damage to
airbag.

Necessary preliminary tasks:

Remove footwell light at bottom

Version with roller sun blind:

Remove roller sun blind on fixed side window

Lever out protective caps (1) on door trim panel (3) and release
screws underneath.

Tightening torque 51 42 1AZ

.

If necessary, lever out airbag emblem (2) with special tool 
00 9 317  and release screw underneath.

Tightening torque 51 42 4AZ

.

RA  Removing and installing rear left or right door trim panel (long version or from

BMW AG - TIS

23.02.2013  01:47

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing Rear Left Or Right Door Trim Panel (long Version Or From|Page 1808 > < 2 RA Removing And Installing_replacing Door Pocket On Rear Left Or Right Door Trim Pa