bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Rear Window Roller Blind > < 3 RA Removing And Installing_replacing Trim For Rear Parcel Shelf|Page 1867
Page 3
background image

If necessary, remove or replace rear window roller blind:

Lever out protective cap (1) on left/right with special tool 
00 9 317 .

Installation:

Retaining lugs (2) of protective caps (1) must not be damaged
or missing.

Lift out shelf (3) over rear groove (1) of rear window roller blind.

Pull front guide (2) out of shelf (3) and remove roller sun blind
towards bottom.

Note:

The operation "Removing or replacing rear window roller blind"
ends here.

Replacement only:

Remove left/right mid-range speaker (2) .

If necessary, remove left/right tweeter.

Remove trims (1) for belt outlet on left/right from rear parcel
shelf (3).

RA  Removing and installing/replacing trim for rear parcel shelf

BMW AG - TIS

23.02.2013  02:12

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

4 RA Removing And Installing_replacing Rear Window Roller Blind > < 3 RA Removing And Installing_replacing Trim For Rear Parcel Shelf|Page 1867