5 Series E60 M5 (S85) SAL
51 47 312
Replacing footrest for front passenger
compartment
Necessary preliminary tasks:
•
Remove trim panel for pedal assembly
Note:
Footrest (1) is glued to carpet along line (2).
Adhesive bead must remain on carpet (risk of damage).
Heat footrest (1) with hot air blower and thereby release adhesive
bead from footrest (1).
If necessary, place footrest (1) under tension with assembly
wedge and pull off in inward direction while applying heat.
Installation:
Heat footrest (1) with hot air blower and apply adhesive bead
along line (1) with hot-melt adhesive gun.
Place footrest (1) on carpet and stick on.
RA Replacing footrest for front passenger compartment
BMW AG - TIS
23.02.2013 02:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
