bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Replacing Wiring Harness In Left Or Right Front Door|Page 2166 > < 5 RA Replacing Wiring Harness For Rear Bumper
Page 1
background image

61 12 200

Replacing wiring harness in left or right front
door

Necessary preliminary tasks:

Close front side window completely.

Remove front door trim panel.

Important!

Follow instructions for handling optical fibres.

Unlock plug connections (1) and disconnect.

Release door wiring harness (2) at point (3).

Unclip door wiring harness (2) at points (4).

Detach soundproofing on front door in working area. 

Unfasten plug connection (1) and disconnect.

Cut through cable ties (2).

Disconnect door wiring harness (3) at retainer (4).

Unclip door wiring harness (3) in area of front window guide.

Installation:

Make sure door wiring harness (3) is correctly laid.

RA  Replacing wiring harness in left or right front door

BMW AG - TIS

23.02.2013  04:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Replacing Wiring Harness In Left Or Right Front Door|Page 2166 > < 5 RA Replacing Wiring Harness For Rear Bumper