bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

55 RA Removing And Installing_replacing Engine Hood Contact Switch > < 53 RA Removing And Installing_replacing Steering Wheel Electronics Control Unit|Page 2328
Page 1
background image

61 31 233

Removing and installing/replacing Lane
Departure Warning motor electrics (sport
steering wheel)

Necessary preliminary tasks:

Remove decorative bar from steering wheel

Release screws (1) and remove retaining plate (2).

Tightening torque 32 33 2AZ

.

Disconnect plug connection (1).

Release screw (2).

Release screws (3) and remove motor electrics (4) complete
with electrical wires.

Installation:

Replace screws (2 and 3).

(2) Tightening torque 32 33 3AZ

(3) Tightening torque 32 33 4AZ

Ensure correct cable routing.

RA  Removing and installing/replacing Lane Departure Warning motor electrics (sport

BMW AG - TIS

23.02.2013  05:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

55 RA Removing And Installing_replacing Engine Hood Contact Switch > < 53 RA Removing And Installing_replacing Steering Wheel Electronics Control Unit|Page 2328