5 Series E60 M5 (S85) SAL
Unfasten plug connection (1) and disconnect.
Release screws (A5...A1).
Installation:
Insert screws (A1...A5) in specified sequence until hand-tight.
To tighten down screw (A2), if necessary move complete wiper
console linkage (2) into reversal position.
Tighten down screws (A1...A5) in specified sequence to
tightening torque 61 61 6AZ
.
Lever out complete wiper console (2) in direction of arrow.
RA Removing and installing console for windshield wiper system completely with moto
BMW AG - TIS
23.02.2013 06:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
