5 Series E60 M5 (S85) SAL
61 71 015
Removing and installing/replacing a jet nozzle
in windshield washer system
Note:
The jet nozzles of the windshield washer system are preset at the
factory and cannot be readjusted.
Unfasten plug connection (1) and disconnect.
Unlock plug housing (2) and disconnect.
Detach connector (3) in direction of arrow from nozzle of
windshield washer system (4).
Unlock nozzle of windshield washer system (4), press out
through opening and remove.
Installation:
Make sure nozzle of windshield washer system (4) is correctly
seated.
Ensure hose is laid without kinks.
RA Removing and installing/replacing a jet nozzle in windshield washer system
BMW AG - TIS
23.02.2013 06:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -