bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing A_C System Compressor (M57, M54)|Page 2644 > < 2 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit|Page 2642
Page 1
background image

64 52 523

Replacing A/C system compressor (M57, M54)

Warning!

Risk of injury!

Avoid contact with refrigerant and refrigerant oil.

Follow safety instructions for handling R 134a refrigerant .

Refrigerant circuit is under high pressure!

Follow safety instructions for handling refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Read and comply with notes on replacing compressor. 

Follow instructions for opening and replacing parts in
refrigerant circuit!

If A/C system is opened for more than 24 hours:

Replacing drier insert for A/C system

Necessary preliminary tasks:

All:

Drawing off refrigerant from A/C system is not included in the

time value of this operation

Remove front underbody protection

Only M57:

Remove pressure pipe

M54 only:

Release coolant expansion tank, disconnect plug

connection and place coolant expansion tank to one side

Version with Dynamic Drive:

Do not release pressure lines on active stabilizer.

Press lock (1) on distributor (2) and detach vent line (3) in
direction of arrow.

Installation:

Make sure vent line (3) is correctly seated in distributor (2).

Lower stabilizer on front axle.

RA  Replacing A/C system compressor (M57, M54)

BMW AG - TIS

23.02.2013  07:47

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing A_C System Compressor (M57, M54)|Page 2644 > < 2 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit|Page 2642