bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 RA Replacing Line From Evaporator To Compressor (S85)|Page 2668 > < 10 RA Replacing Line From Evaporator To Condenser (S85)|Page 2666
Page 1
background image

64 53 702

Replacing line from evaporator to compressor
(S85)

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling R 134a refrigerant .

Avoid contact with refrigerant and refrigerant oil.

Follow safety instructions for handling refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Follow instructions for opening and replacing parts in
refrigerant circuit.

If A/C system is opened for more than 24 hours:

Replace desiccant insert for A/C system 

Necessary preliminary tasks:

Drawing off, evacuating and filling the A/C system are not

included in the time value given for this work operation

Remove fresh air duct

Remove right intake filter housing 

Detach fluid reservoir for power steering and place to one

side.

Feed out rubber grommet (1).

Release nut (2) and detach refrigerant lines (3,4) in direction of
arrow.

Installation:

Make sure rubber grommet (1) is correctly seated.

Replace sealing rings and moisten with refrigerant oil.

Tightening torque  64 53 7AZ

.

RA  Replacing line from evaporator to compressor (S85)

BMW AG - TIS

23.02.2013  07:54

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

11 RA Replacing Line From Evaporator To Compressor (S85)|Page 2668 > < 10 RA Replacing Line From Evaporator To Condenser (S85)|Page 2666