5 Series E61 520d (M47T2) TOUR
Install piston so that arrow points to camshaft drive.
Entire circumference of tightening strap must rest firmly on
crankcase.
Important!
Danger of piston ring failure.
Press in piston only with finger force (do not knock in!).
Attach crankpin to connecting rod.
Apply light coat of oil to connecting-rod bearing shells.
Fit bearing caps so that pair numbers match up.
Install new conrod bolts.
Tighten down conrod bolts with special tool 00 9 120 or special
tool 11 2 110.
Tightening torque, 11 24 1AZ
Clean sealing surface.
Assemble engine.
RA Removing and installing or replacing all pistons (M47TU / M47T2)
BMW AG - TIS
25.01.2013 18:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -