5 Series E61 520d (M47T2) TOUR
51 71 482
Removing and installing/replacing left or right
tension strut (on rear axle)
Important!
Observe safety instructions for raising the vehicle
Do not drive vehicle without tension strut installed; failure to
comply with this instruction will result in damage to the body!
Release screws (1).
Remove tension strut (2).
Installation:
Tightening torque 51 61 3AZ
.
Replace screws.
RA Removing and installing/replacing left or right tension strut (on rear axle)
BMW AG - TIS
25.01.2013 23:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -