5 Series E61 520d (M47T2) TOUR
Adjusting mechanism before installing glass lid:
Insert screwdriver into upper connecting link (3).
Slide drive plate (2) towards rear until drive wedge (1) runs against screwdriver.
Note:
Check that mechanical components on left and right sides have same status.
Note:
Check smooth and noise-free running of kinematics.
Check function.
RA Removing and installing mechanism for front glass lid
BMW AG - TIS
26.01.2013 06:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -