5 Series E61 520d (M47T2) TOUR
All:
Pull steering wheel electronics control unit (1) in direction of
arrow out of steering wheel (2).
Unlock plug connections (1) and disconnect.
Remove steering wheel electronics control unit (2).
Installation:
Guide pins (3) of steering wheel electronics control unit (2) must
be exactly seated in associated mountings.
Make sure electrical leads (4) are correctly routed.
RA Removing and installing/replacing steering wheel electronics control unit
BMW AG - TIS
26.01.2013 08:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -