5 Series E61 520d (N47) TOUR
Important!
Risk of injector breakage! Observe tightening torque
13 53 2AZ
without fail.
1.
Replace pressure lines.
2.
Hand-tighten all union nuts on pressure lines.
3.
Tighten down union nuts on injectors to specified torque.
4.
Tighten down union nuts on pressure accumulator to
specified torque.
5.
Check all components of common rail system for leaks.
RA Removing and installing/replacing all pressure lines to injectors (N47)
BMW AG - TIS
30.01.2013 06:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -