5 Series E61 520d (N47) TOUR
13 53 180
Replacing pressure line (between high-
pressure pump and pressure accumulator)
(N47S)
Special tools required:
•
37 1 152
.
Installation:
Layout of common rail system
Necessary preliminary tasks:
•
Read fault memory of DDE control unit.
•
Switch off ignition.
•
Remove acoustic cover
•
Disconnect and connect intake air manifold.
•
Cover intake ducts.
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
RA Replacing pressure line (between high-pressure pump and pressure accumulator) (N
BMW AG - TIS
30.01.2013 06:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
