5 Series E61 520d (N47) TOUR
51 24 004
Adjusting rear lid lock
Necessary preliminary tasks:
•
Remove panel for rear lid
Prerequisite:
Rear lid must be correctly adjusted to fit; if necessary, adjust rear
lid.
For ideal adjustment, refer to Body gap dimensions.
Press in buffer stops (1) on rear lid on left/right completely.
Note:
Operation is described in:
•
Removing and installing/replacing buffer stops on rear lid.
Unclip covers (1).
Slacken screws underneath on servo lock until it is just able to
move and centers itself.
Important!
Lock pin (3) must not brush against upper rear lid lock
section.
Close rear lid.
Servo lock (2) thereby adjusts itself correctly.
Installation:
Check sliders (1) on servo lock (2) for damage, replace if
necessary.
RA Adjusting rear lid lock
BMW AG - TIS
30.01.2013 12:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
