5 Series E61 520d (N47) TOUR
52 13 015
Removing and installing/replacing actuating
unit on left or right front seat (normal/semi-
electric)
Necessary preliminary tasks:
•
Remove outer cover on front seat
Pull lever and release screw (1).
Note:
Protect seat rails (mechanism) by covering against chips/swarf.
Drill out rivets (2) with 4.2 mm dia. drill bit.
Remove actuating unit.
Unclip Bowden cable sleeve (1).
Feed Bowden cable nipple (2) out of fixture (3).
RA Removing and installing/replacing actuating unit on left or right front seat (no
BMW AG - TIS
30.01.2013 14:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -