bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing A TV Amplifier > < 1 RA Removing And Installing Or Replacing Blocking Circuit
Page 2
background image

Note:

Remove both rear and if necessary front counter supports for
luggage compartment net.

Fold up cover (1).

Release screw (2) and remove counter support for luggage
compartment net (3).

Pull off roofliner mucket in work area.

Important!

Do not kink roofliner under any circumstances.

Unclip and lower roofliner in rear area.

The blocking circuit can be removed through the opening created
in the roofliner (speaker cover).

Note:

For purposes of clarity, illustrations show roofliner removed.

Unlock plug connections (1) and disconnect.

Release screw (2).

Remove blocking circuit (3) in direction of arrow from rear window
frame (4).

Installation:

Fit blocking circuit (1) so that screw (2) engages thread (3) and
locating pin (4) engages bore (5).

RA  Removing and installing or replacing blocking circuit

BMW AG - TIS

02.02.2013  17:50

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Removing And Installing_replacing A TV Amplifier > < 1 RA Removing And Installing Or Replacing Blocking Circuit