5 Series E61 520d (N47) TOUR
Installation:
Insert camera (1) in holder (2).
Left guide pin (3) must be correctly seated in holder (2).
Apply screw securing adhesive to screw (4) and tighten screw.
Tab (1) must snap noticeably into holder (2).
Make sure guide pin (3) is correctly seated in holder.
Apply screw securing adhesive to screw (4) and tighten screw.
Installation:
•
Carry out coding/programming.
•
Adjust night vision camera
RA Replacing night vision camera
BMW AG - TIS
02.02.2013 18:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -