5 Series E61 520i (N43) TOUR
Clip in oil line for lubricating inlet camshaft at retaining clips (see
arrows).
Insert banjo bolts (1) and tighten down.
Tightening torque: 11 12 11AZ
.
Mount both VANOS adjustment units.
Adjust valve timing.
Assemble engine.
RA Removing and installing/replacing inlet camshaft (N43)
BMW AG - TIS
03.02.2013 15:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -