5 Series E61 520i (N43) TOUR
11 78 510
Replacing lambda oxygen monitor sensor
(N43)
Special tools required:
•
11 7 030
•
11 9 150
Necessary preliminary tasks:
•
Remove front splash guard.
•
Remove tension strut on spring strut dome
•
Read out fault memory of DME control unit
•
Switch off ignition
Warning!
Scalding hazard!
Only perform this task on an engine that has cooled down.
Unclip plug connection (1) and disconnect plug.
RA Replacing lambda oxygen monitor sensor (N43)
BMW AG - TIS
03.02.2013 15:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
