5 Series E61 520i (N43) TOUR
18 00 020
Removing and installing manifold cooling
duct (N43)
Warning!
Scalding hazard!
These tasks should only be carried out on an exhaust system
that has cooled down.
Necessary preliminary tasks:
Remove acoustic cover
Slacken output stages and leads on cylinder head cover.
Unfasten nut. Remove grounding strap.
Unfasten nut.
Release air scoop on cooling duct.
Raise cooling duct, slide towards rear and lift out at an angle.
Installation:
Assemble engine.
RA Removing and installing manifold cooling duct (N43)
BMW AG - TIS
03.02.2013 16:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -