5 Series E61 520i (N43) TOUR
•
Unlock and disconnect plug (1) by turning.
•
Do not touch pins.
•
Release cable from retainers.
•
Insert special tool 24 2 390 in sealing sleeve.
Operations are described in
Notes on mechatronics
Important!
Read and comply with important note.
Release screws.
Tightening torque: 24 00 1AZ
.
Installation:
Hole (1) of drive plate must be accessible from opening on
engine oil sump. Check dowel sleeves for correct seating.
Replace damaged dowel sleeves.
Installation:
Rotate torque converter until bore in torque converter is flush with
bore in driving disc.
Flange automatic transmission to engine.
RA Removing and installing automatic transmission (6HP19Z) N43, N46T
BMW AG - TIS
03.02.2013 17:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
