5 Series E61 520i (N43) TOUR
Reach into trim (1) and unclip upwards from retainers (2).
Feed out trim (1) upwards over gaiter (3), disconnect associated
plug connection and remove trim (1).
Installation:
Make sure retainers (1) are correctly seated in associated
mountings of trim (2).
Replacement:
If necessary, remove driving dynamics switch.
RA Removing and installing/replacing trim for preselector lever (from 03/2007)
BMW AG - TIS
03.02.2013 22:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -