5 Series E61 523i (N52) TOUR
Secure special tool 11 4 270 with gripping pliers (3) to guide
block (1).
Important!
Special tool 11 4 270 is only secured to guide block.
Adjusting the gripping pliers (3) is not permitted (risk of
damage) on special tool 11 4 270 .
Warning!
Risk of injury in event of incorrect use.
Important!
Incorrect handling risk of damage.
Secure both bearing pins (2) in return spring with knurled
screw (1) on special tool 11 4 270 .
Important!
Check return spring again on intermediate lever to ensure
correct installation position.
Press special tool 11 4 270 in direction of arrow as far as it will
go.
Insert steel screw (2).
To avoid jamming with screw (2) and return spring, it is
necessary when inserting screw (2) to increase the pretension on
special tool 11 4 270 uniformly.
Important!
Risk of damage to cylinder head thread.
Tightening torque: 11 37 2AZ
.
Remove special tool 11 4 270 .
At cylinder no. 3, adjust oil nozzle (2) exactly so that oil
spray (3) points precisely towards spline teeth.
RA Removing and installing/replacing intermediate levers (N52)
BMW AG - TIS
05.02.2013 01:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
