5 Series E61 523i (N52) TOUR
Draining coolant:
Open cap (1) on coolant expansion tank (2).
Installation:
Observe arrow marks on cap and expansion tank.
If fitted, release drain plug (1) on coolant radiator at bottom. On
coolant radiators which do not have a drain plug, remove coolant
hose.
Drain, catch and dispose off coolant.
Unfasten and detach coolant hose (1) from thermostat housing.
Drain, catch and dispose off coolant.
Adding coolant:
Use only recommended coolant.
Observe mixture ratio (antifreeze/water).
Installation:
Observe venting instructions without fail.
Vent cooling system.
Check cooling system for leaks.
RA Draining and adding coolant (N52, M57T2)
BMW AG - TIS
05.02.2013 02:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
