5 Series E61 523i (N52) TOUR
Screw special tool 23 0 490 into one of two removal holes.
Withdraw radial seal from transmission housing with aid of impact
weight.
Push radial seal (1) onto special tool 23 0 320 .
Installation:
Coat sealing lips of radial seal with gear oil.
Slide special tool 23 0 320 onto input shaft.
Drive in radial seal with plastic hammer as far as it will go.
RA Replacing radial seal for drive shaft (GS6-17BG/DG)
BMW AG - TIS
05.02.2013 03:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
