bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Checking_topping Up Fluid Level In Automatic Transmission (GA6HP19Z)|Page 732 > < 3 RA Safety Instructions For Handling Oil
Page 1
background image

00 11 237

Checking/topping up fluid level in automatic
transmission (GA6HP19Z)

Important!

Use only the approved transmission fluid.

Failure to comply with this requirement will result in serious
damage to the automatic transmission!

Installation:

Tighten down filler plug using

1. 

Hexagon wrench 8 A/F

2. 

torque wrench

3. 

Socket 8 A/F

Topping up transmission fluid after a repair:

Stand vehicle on a level surface and secure against rolling off.

Undo filler plug (1).

Installation:

Replace sealing ring.

Top up transmission fluid until it emerges from filling orifice.

Start engine.

Replenish transmission fluid until it emerges from filling orifice.

Screw in filler plug (1).

Tightening torque: 24 11 7AZ

.

Press brake pedal to floor and shift through gears 1 to 6 several
times at idle speed. Then shift to "P" position (Park).

Then check fluid level.

RA  Checking/topping up fluid level in automatic transmission (GA6HP19Z)

BMW AG - TIS

05.02.2013  03:22

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Checking_topping Up Fluid Level In Automatic Transmission (GA6HP19Z)|Page 732 > < 3 RA Safety Instructions For Handling Oil