5 Series E61 523i (N52) TOUR
25 16 056
Removing and installing/replacing shift tower
(Steptronic)
Necessary preliminary tasks:
•
Remove rear underbody protection.
•
Remove centre console.
Move selector lever to park position "P".
Grip clamping sleeve (1) and slacken nut (2).
Installation:
Adjust selector lever.
Note:
E85/E63/E64:
Brace cable on hex head (1) and loosen nut (2).
Tightening torque: 25 16 1AZ
.
Pull cable (3) out of bracket.
Note:
E60/E61/E85 N52:
Detach retainer (3) downwards using a screwdriver.
RA Removing and installing/replacing shift tower (Steptronic)
BMW AG - TIS
05.02.2013 03:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
