5 Series E61 523i (N52) TOUR
31 31 000
Removing and installing complete left or right
spring strut shock absorber
Important!
If the centering pin is missing from the support bearing, the
position of the studs to the wheel arch must be marked so that
the original camber is approximately maintained.
Only one nut may ever be released for marking.
Necessary preliminary tasks:
•
Remove swivel bearing
M5:
Disconnect plug connection (2).
Unclip connecting cable (1) from spring strut dome cover (3).
Detach connecting cable (1) from spring strut.
If necessary, release expander rivet (1).
If necessary, unclip spring strut dome cover (2) from front cross-
strut.
RA Removing and installing complete left or right spring strut shock absorber
BMW AG - TIS
05.02.2013 04:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
