bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing _ Replacing Interlock Cable (vehicles Up To 09_2005)|Page 970 > < 1 RA Removing And Installing_replacing Lock Cylinder For Steering Lock (up To 09_2005
Page 1
background image

32 32 170

Removing and installing / replacing interlock
cable (vehicles up to 09/2005)

Necessary preliminary tasks:

Remove trim for storage tray

Remove front insert for ashtray

After installation:

Adjusting interlock cable

Release screw (1) and remove bracket (2).

Move interlock cable (3) to left and then remove towards front.

If necessary, secure cord/cable to interlock cable (3).

Important!

Do not kink interlock cable.

Turn guide sleeve (1) through approx. 45

°

.

Remove interlock cable (2) from steering column and pull out.

If necessary, remove cord/wire from interlock cable (2).

RA  Removing and installing / replacing interlock cable (vehicles up to 09/2005)

BMW AG - TIS

05.02.2013  04:52

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing _ Replacing Interlock Cable (vehicles Up To 09_2005)|Page 970 > < 1 RA Removing And Installing_replacing Lock Cylinder For Steering Lock (up To 09_2005