5 Series E61 523i (N52) TOUR
32 33 001
Removing and installing/replacing steering
wheel (from 03/2007)
Note:
Wheel/chassis alignment is not necessary after the steering wheel
has been removed and installed or replaced.
Necessary preliminary tasks:
•
Remove airbag unit
•
Replacement only: Remove retaining plate for multifunction
steering wheel switch
Move wheels/steering wheel into straight-ahead position.
Disconnect plug connection (1).
Release screw (2) and remove steering wheel.
Installation:
Make sure connecting lead(s) is/are correctly laid.
Tightening torque 32 33 1AZ
.
Important!
Risk of damage!
Driver (1) must engage in opening (2).
Installation:
Align steering wheel using grooved toothing to steering column
and attach.
RA Removing and installing/replacing steering wheel (from 03/2007)
BMW AG - TIS
05.02.2013 04:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
