5 Series E61 523i (N52) TOUR
34 00 009
Checking brakes on test stand
Necessary preliminary tasks:
•
Check tyres for damage
•
Check tyre treads
•
Check tyre pressure
In the case of vehicles with DSC, the system must be deactivated
with the switch. The DSC telltale and warning light must light up in
the instrument cluster!
The brakes must be at normal operating temperature. For this
purpose, gently warm up the brake disks/drums while dry by
braking the vehicle several times.
E65 and E66: Carry out function check on parking brake.
Important!
Only brake test stands (dynamic analyzers) with test speeds
of 2.5-6 km/h may be used.
You must follow without fail the guidelines contained in the
operating instructions of the relevant test stand manufacturer.
Failure to do so may result in damage to the vehicle and the
system and also personal injury.
RA Checking brakes on test stand
BMW AG - TIS
05.02.2013 05:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
