5 Series E61 523i (N52) TOUR
Guide handbrake Bowden cables (1) with a screwdriver inwards
and pull out of balance bar (2).
Disconnect handbrake Bowden cables at expander locks.
Release screw (1) and remove bracket.
Installation:
Tightening torque 34 41 5AZ
.
Pull handbrake Bowden cables (2) out of wheel carrier.
Disconnect handbrake Bowden cables (1) out of mountings.
Pull handbrake Bowden cables (1) out of guide (2) and remove.
RA Removing and installing / replacing both handbrake Bowden cables
BMW AG - TIS
05.02.2013 07:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
