5 Series E61 523i (N52) TOUR
41 61 000
Removing and installing engine hood
Refer to the description texts of the KSD CD (FRU 41 61 000)
for details of stripping-down and rigging work.
Warning!
Support engine hood in fully opened position with suitable
apparatus. Risk of injury.
Note:
Carry over schematic representation to the relevant vehicle type.
Loosen screws (1).
Unfasten screws (2).
Remove hood lid.
Installation:
Install engine hood at screw locations to on hinge. This dispenses
with the need for adjustment after installation.
If this is not possible, adjust engine hood.
Tightening torque 41 61 1AZ
.
RA Removing and installing engine hood
BMW AG - TIS
05.02.2013 09:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -