5 Series E61 523i (N52) TOUR
51 13 305
Removing and installing/replacing left or right
rail
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.
Disconnect battery.
Necessary preliminary tasks:
•
Remove roofliner
•
Partially remove head airbag
Release nuts (1 to 3).
Important!
To avoid dents on the roof, use nuts (1 and 3) with
25 mm dia. washer and nut (2) with 35 mm dia. washer.
Observe tightening specification without fail in order to avoid
ingress of water.
A) Tighten down nuts (1 to 3) to tightening torque
51 13 3AZ
B) Adhere to settling time, refer to tightening torque
51 13 3AZ
C) Tighten down nuts (1 to 3) again to tightening torque
51 13 3AZ
RA Removing and installing/replacing left or right rail
BMW AG - TIS
05.02.2013 09:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
