bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

13 RA Replacing Mirror Glass > < 11 RA Removing And Installing_replacing Rear Insert (in Storage Compartment)
Page 1
background image

51 16 000

Removing and installing/replacing mirror on
left or right front door

Necessary preliminary tasks:

Partially lever out cover on inner door window frame in area

at front.

Disconnect plug connection (1).

Unlock plug connections (2) and disconnect from control
unit (3).

Press cover (1) to one side.

Press rubber grommet (2) outwards.

Release screws (3) and feed out mirror (4) with cable.

Installation:

Tightening torque 51 16 1AZ

.

Replacement only:

Due to the thread-tapping screws, the tightening torque of the new
mirror is increased by 2 Nm.

Tightening torque 51 16 1AZ

.

Installation:

Following parts of mirror must not be damaged or missing:

Seal on mirror base plate

Sound insulation in front door

Carry out function check.

RA  Removing and installing/replacing mirror on left or right front door

BMW AG - TIS

05.02.2013  09:41

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

13 RA Replacing Mirror Glass > < 11 RA Removing And Installing_replacing Rear Insert (in Storage Compartment)