5 Series E61 523i (N52) TOUR
51 24 145
Removing and installing/replacing button for
rear lid actuation
Special tools required:
•
00 9 323
Necessary preliminary tasks:
•
Remove panel for rear lid.
If necessary, disconnect plug connection in rear lid.
Move special tool 00 9 323 under front edge of button (1) and
lever out button (1).
Pull button (1) out of rear lid (2).
Pull off clip (1) and remove microswitch (2). Pull off seal (3).
Installation:
Seal (3) must be undamaged and button must be correctly
snapped into place.
Perform function check with trunk lid open.
RA Removing and installing/replacing button for rear lid actuation
BMW AG - TIS
05.02.2013 10:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
