5 Series E61 523i (N52) TOUR
51 41 060
Removing and installing/replacing armrest on
front left or right door trim panel (up to
03/2007)
Necessary preliminary tasks:
•
Remove front door trim panel
•
Remove inside door handle
Release nuts (1 and 2).
Remove retaining plate from door trim panel (4).
Installation:
Retaining plate must be positioned over pin (3).
Important!
Only drill down to door trim panel area (2) so as not to
damage the contact surface.
Drill out welding spots (1) on door trim panel (2) with 8 mm dia.
welding spot drill bit.
Release nut (3) and remove armrest.
Note:
Armrest is welded to door trim panel only on initial installation.
If necessary, release nuts (3) instead of welding spots (1).
RA Removing and installing/replacing armrest on front left or right door trim panel
BMW AG - TIS
05.02.2013 10:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
