5 Series E61 523i (N52) TOUR
51 41 ...
Replacing door pocket on front left or right
door trim panel
Necessary preliminary tasks:
•
Remove front door trim panel
Important!
Only drill down to door trim panel area (2) so as not to
damage the contact surface.
Drill out welding spots (1) on door trim panel (2) with 8 mm
dia. welding spot drill bit and remove door pocket.
Note:
Door pocket is welded to door trim panel only on initial installation.
If necessary, release nuts instead of welding spots (1).
Installation:
Secure door pocket with nuts (1) to door trim panel (2).
RA Replacing door pocket on front left or right door trim panel
BMW AG - TIS
05.02.2013 10:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
