5 Series E61 523i (N52) TOUR
51 47 101
Removing and installing/replacing luggage
compartment floor trim panel
Version up to build date 04/2005:
Lift handle (1) and remove luggage compartment floor trim
panel (2).
Version from build date 04/2005:
Open luggage compartment floor trim panel.
Disengage gas-filled struts at top left and right.
1.
Push retainer spring to end of gas-filled strut.
2.
Detach gas-filled strut from ball head.
Close luggage compartment floor trim panel.
Remove front panel for luggage compartment floor.
Release screws (1) and lift out luggage compartment floor trim
panel (2).
Installation:
Slide luggage compartment floor trim panel (2) forwards and
secure screws (1) in this position.
Engage gas-filled struts, check position and function of luggage
compartment floor trim panel (2).
If necessary, release screws (1) and reposition luggage
compartment floor trim panel (2).
RA Removing and installing/replacing luggage compartment floor trim panel
BMW AG - TIS
05.02.2013 11:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -