5 Series E61 523i (N52) TOUR
Note:
Position of butylene tape (1) on inner door plate.
Important!
Do not damage Bowden cable (2) and lock knob control
rod (3).
Note:
Position of butylene tape (1) on sound insulation (2).
Note:
A marking (2) is provided all round on the sound insulation (1).
Butylene tape (3) rests on or inside the marking (2).
Clean bonding area with adhesive remover (sourcing reference:
BMW Parts Service).
Air drying time: 1 minute
Important!
Adhesive areas must be dry and free of dust and grease.
After cleaning, do not touch the adhesive areas with bare
hands.
RA Removing and installing/replacing sound insulation on left or right rear door
BMW AG - TIS
05.02.2013 11:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
