5 Series E61 523i (N52) TOUR
Bringing head restraint together - version without button (MFS):
Pull spring catches apart and push head restraint together.
Maintain position.
Bringing head restraint together - version with button (Basic):
Press button (1) and push head restraint together.
Maintain position.
Locking release plate:
Hold pushed-together head restraint in position and push release
plate (1) upwards up to stop.
Release plate (1) must audibly snap into place.
Checking head restraint lock:
Check end position of release plate (1).
All four springs must be engaged (snapped into place).
RA Replacing gas cartridge (pyroactivator) for crash-active head restraint on front
BMW AG - TIS
05.02.2013 11:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
